dRonin  adbada4
dRonin firmware
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
pios_config.h
Go to the documentation of this file.
1 
15 /*
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License as published by
18  * the Free Software Foundation; either version 3 of the License, or
19  * (at your option) any later version.
20  *
21  * This program is distributed in the hope that it will be useful, but
22  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
23  * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
24  * for more details.
25  *
26  * You should have received a copy of the GNU General Public License along
27  * with this program; if not, see <http://www.gnu.org/licenses/>
28  */
29 
30 #ifndef PIOS_CONFIG_H
31 #define PIOS_CONFIG_H
32 
33 #include <pios_flight_config.h>
34 
35 /* Major features */
36 #define STABILIZATION_LQG
37 
38 /* Enable/Disable PiOS Modules */
39 #define PIOS_INCLUDE_DMA_CB_SUBSCRIBING_FUNCTION
40 #define PIOS_INCLUDE_I2C
41 #define PIOS_INCLUDE_SPI
42 #define WDG_STATS_DIAGNOSTICS
43 
44 /* Select the sensors to include */
45 #define PIOS_INCLUDE_MPU
46 #define PIOS_INCLUDE_MPU_MAG
47 #define PIOS_INCLUDE_BMP280
48 #define PIOS_INCLUDE_HMC5883
49 #define PIOS_INCLUDE_HMC5983_I2C
50 #define PIOS_TOLERATE_MISSING_SENSORS
51 
52 /* Com systems to include */
53 #define PIOS_INCLUDE_MAVLINK
54 #define PIOS_INCLUDE_LIGHTTELEMETRY
55 
56 
57 /* Supported receiver interfaces */
58 
59 
60 /* Flags that alter behaviors */
61 #define AUTOTUNE_AVERAGING_DECIMATION 2
62 
63 /* Alarm Thresholds */
64 
65 /* Task stack sizes */
66 #define PIOS_EVENTDISPATCHER_STACK_SIZE 1024
67 
68 /*
69  * This has been calibrated 2014/02/21 using chibios @ b89da8ac379646ac421bb65a209210e637bba223.
70  * Calibration has been done by disabling the init task, breaking into debugger after
71  * approximately after 60 seconds, then doing the following math:
72  *
73  * IDLE_COUNTS_PER_SEC_AT_NO_LOAD = (uint32_t)((double)idleCounter / xTickCount * 1000 + 0.5)
74  *
75  * This has to be redone every time the toolchain, toolchain flags or RTOS
76  * configuration like number of task priorities or similar changes.
77  * A change in the cpu load calculation or the idle task handler will invalidate this as well.
78  */
79 #define IDLE_COUNTS_PER_SEC_AT_NO_LOAD (2175780)
80 
81 //#define CAMERASTAB_POI_MODE
82 
83 #define PIOS_INCLUDE_FASTHEAP
84 #define PIOS_INCLUDE_WS2811
85 #define SYSTEMMOD_RGBLED_SUPPORT
86 
87 #endif /* PIOS_CONFIG_H */
88 
pios_flight_config.h