dRonin  adbada4
dRonin firmware
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
Functions
STM32F0xx_System_Private_Functions
Stm32f0xx_system

Functions

void SystemInit (void)
 Setup the microcontroller system. Initialize the Embedded Flash Interface, the PLL and update the SystemCoreClock variable. More...
 
void SystemCoreClockUpdate (void)
 Update SystemCoreClock according to Clock Register Values The SystemCoreClock variable contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters. More...
 
static void SetSysClock (void)
 Configures the System clock frequency, AHB/APBx prescalers and Flash settings. More...
 

Detailed Description

Function Documentation

static void SetSysClock ( void  )
static

Configures the System clock frequency, AHB/APBx prescalers and Flash settings.

Note
This function should be called only once the RCC clock configuration is reset to the default reset state (done in SystemInit() function).
Return values
None

Definition at line 259 of file system_stm32f0xx.c.

void SystemCoreClockUpdate ( void  )

Update SystemCoreClock according to Clock Register Values The SystemCoreClock variable contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.

Note
Each time the core clock (HCLK) changes, this function must be called to update SystemCoreClock variable value. Otherwise, any configuration based on this variable will be incorrect.
- The system frequency computed by this function is not the real frequency in the chip. It is calculated based on the predefined constant and the selected clock source:
  • If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
  • If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
  • If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) or HSI_VALUE(*) multiplied/divided by the PLL factors.

(*) HSI_VALUE is a constant defined in stm32f0xx.h file (default value 8 MHz) but the real value may vary depending on the variations in voltage and temperature.

(**) HSE_VALUE is a constant defined in stm32f0xx.h file (default value 8 MHz), user has to ensure that HSE_VALUE is same as the real frequency of the crystal used. Otherwise, this function may have wrong result.

  • The result of this function could be not correct when using fractional value for HSE crystal.
    Return values
    None

Definition at line 208 of file system_stm32f0xx.c.

void SystemInit ( void  )

Setup the microcontroller system. Initialize the Embedded Flash Interface, the PLL and update the SystemCoreClock variable.

Return values
None

Definition at line 136 of file system_stm32f0xx.c.